TCS "DP-Series" drop-in decoders for HO-scale.
An HO scale decoder with a built in 8 pin NMRA plug. By far one of the easiest decoders to install, the DP2X can be plugged into many locomotives with no effort. Provides 1 amp continuous and 2 amp peak draw. The DP2X features TCS exclusive auto-adjusting BEMF.
The DP2X is a motor control decoder with two lighting functions (headlight and reverse light)
Dimensions: .460x.690x.140 or 11.7mm x17.5 mm x 3.5mm
SKU: 1028
An HO scale decoder with a built in 8 pin NMRA plug which is oriented vertically to fit in British outline locomotives. By far one of the easiest decoders to install, the DP2X-UK can be plugged into many British locomotives with no effort. Provides 1 amp continuous and 2 amp peak draw. The DP2X-UK features TCS exclusive auto-adjusting BEMF.
Dimensions: .460x.690x.140 or 11.7mm x17.5 mm x 3.5mm
SKU: 1287
Now featuring Railcom detection for railroad automation.
This full featured BEMF decoder with 5 available functions is designed specifically to meet the needs of Atlas Silver Series HO-Scale modelers who are converting their HO-Scale locomotives to DCC.This decoder will also fit many other engines including KATO and Athearn. We have included our first generation BEMF for outstanding slow speed performance, quiet drive for super quiet engine performance, and auto adjusting motor control for hassle free set-up.
Dimensions: .636"X .509"X 0.042" or 16.15mm X 12.92mm X 1.06mm.
SKU: 1335
Now featuring Railcom detection for railroad automation.
TCS "A-Series" Drop-in Decoders for HO-scale.
Four-function (headlight/reverse light and two extra functions), 1.3-amp continuous 2.0 amp peak, HO "drop in" decoder for Atlas, Athearn, Kato, Bachmann, etc.
The A4X features TCS exclusive, auto-adjusting BEMF.
NEW: This decoder also features onboard 1K ohm 1/4 watt resistors for LED's!
Dimensions: 2.860x0.680x0.145 or 72.64mm x 17.272mm x 3.683mm
SKU: 1000
Six-function (headlight/reverse light and four extra functions), 1.3-amp continuous 2.0 amp peak, 1.3-amp HO "drop in" decoder with on board 1.5 volt regulated power supply for Atlas, Athearn, Kato, Bachmann, etc.
The A6X features TCS exclusive, auto-adjusting BEMF, and an onboard 1.5v supply.
NEW: This decoder also features onboard 1K ohm 1/4 watt resistors for LED's!
Dimensions: 2.860x0.680x0.145 or 72.64mm x 17.272mm x 3.683mm
SKU: 1001
TCS Drop-In Decoder Selection for N-Scale Atlas locomotives
A shorter version of the AMD4, the ASD4 is a drop-in for the Atlas GP7, GP9, GP30, and GP35. It has two LED's (one on the front, and one on the back), and it supports to extra functions by way of soldered on leads.
The ASD4 features the TCS exclusive auto-adjusting BEMF.
SKU: 1279
This decoder features onboard 680 ohm 1/4 watt resistors for LED's!
Dimensions 2.73x.349x.13 or 69.34mm x 8.865mm x 3.3mm
The AMD4 is drop in for the Atlas: GP-38, RS-11, Dash8-40B, Dash8-40BW, C628, C630, B23-7, B30-7, B36-7, Also DCC ready version of GP-40, GP-40-2, SD-7, SD-9, SD-35, TrainMaster and U25B. It has two extra functions which can be connected by soldering onto provided pads.
The AMD4 features the TCS exclusive auto-adjusting BEMF.
SKU: 1029
This decoder features onboard 680 ohm 1/4 watt resistors for LED's!
Dimensions 2.83x.351x.13 or 71.88mm x 8.92mm x 3.3mm
The ALD4 decoder is now shipping. The ALD4 is a drop-in for the Atlas N Scale SD50 and SD60 locomotives.
This decoder features onboard 680 ohm 1/4 watt resistors for LED's!
Dimensions 3.035 x .035 x .13 or 77.09mm x 8.89mm x 3.3mm
The MP15N is a Four function drop in for Atlas N scale MP-15 locomotive.
The MP15N features the TCS exclusive auto-adjusting BEMF.
SKU: 1030
Dimensions 2.085 x .355 x 0.095 or 52.95mm x 9.01mm x 2.41mm
TCS Drop-In Decoder Selection for N-Scale Atlas locomotives
A shorter version of the AMD4, the ASD4 is a drop-in for the Atlas GP7, GP9, GP30, and GP35. It has two LED's (one on the front, and one on the back), and it supports to extra functions by way of soldered on leads.
The ASD4 features the TCS exclusive auto-adjusting BEMF.
SKU: 1279
This decoder features onboard 680 ohm 1/4 watt resistors for LED's!
Dimensions 2.73x.349x.13 or 69.34mm x 8.865mm x 3.3mm
The AMD4 is drop in for the Atlas: GP-38, RS-11, Dash8-40B, Dash8-40BW, C628, C630, B23-7, B30-7, B36-7, Also DCC ready version of GP-40, GP-40-2, SD-7, SD-9, SD-35, TrainMaster and U25B. It has two extra functions which can be connected by soldering onto provided pads.
The AMD4 features the TCS exclusive auto-adjusting BEMF.
SKU: 1029
This decoder features onboard 680 ohm 1/4 watt resistors for LED's!
Dimensions 2.83x.351x.13 or 71.88mm x 8.92mm x 3.3mm
The ALD4 decoder is now shipping. The ALD4 is a drop-in for the Atlas N Scale SD50 and SD60 locomotives.
This decoder features onboard 680 ohm 1/4 watt resistors for LED's!
Dimensions 3.035 x .035 x .13 or 77.09mm x 8.89mm x 3.3mm
The MP15N is a Four function drop in for Atlas N scale MP-15 locomotive.
The MP15N features the TCS exclusive auto-adjusting BEMF.
SKU: 1030
Dimensions 2.085 x .355 x 0.095 or 52.95mm x 9.01mm x 2.41mm
The VO-1000 is a Four Function drop in for Atlas N scale VO-1000 locomotive.
The VO-1000 features the TCS exclusive auto-adjusting BEMF.
SKU: 1031
WDimensions: 3.03x0.355x0.135 or 76.962mm x 9.017mm x 3.429mm
|