NANCY'S TRAINS YOUR DCC DECODER SOURCE

A shorter version of the AMD4, the ASD4 is a drop-in for the Atlas GP7, GP9, GP30, and GP35. It has two LED's (one on the front, and one on the back), and it supports to extra functions by way of soldered on leads.

The ASD4 features the TCS exclusive auto-adjusting BEMF.

This decoder features onboard 680 ohm 1/4 watt resistors for LED's!

Dimensions 2.73”x.349”x.13” or 69.34mm x 8.865mm x 3.3mm

SKU: 1279

The AMD4 is drop in for the Atlas: GP-38, RS-11, Dash8-40B, Dash8-40BW, C628, C630, B23-7, B30-7, B36-7, Also DCC ready version of GP-40, GP-40-2, SD-7, SD-9, SD-35, TrainMaster and U25B.

It has two extra functions which can be connected by soldering onto provided pads.

The AMD4 features the TCS exclusive auto-adjusting BEMF.

This decoder features onboard 680 ohm 1/4 watt resistors for LED's!

Dimensions 2.83”x.351”x.13” or 71.88mm x 8.92mm x 3.3mm

The ALD4 decoder is now shipping. The ALD4 is a drop-in for the Atlas N Scale SD50 and SD60 locomotives.

This decoder features onboard 680 ohm 1/4 watt resistors for LED's!

Dimensions ”3.035 x .035” x .13” or 77.09mm x 8.89mm x 3.3mm

The MP15N is a Four function drop in for Atlas N scale MP-15 locomotive.

The MP15N features the TCS exclusive auto-adjusting BEMF.

Dimensions 2.085” x .355” x 0.095” or 52.95mm x 9.01mm x 2.41mm

The VO-1000 is a Four Function drop in for Atlas N scale VO-1000 locomotive.

The VO-1000 features the TCS exclusive auto-adjusting BEMF.

2 Onboard superbright, golden white LED's. 1 Amp continuous motor drive, 2 Amp peak.

Drop in decoder for Kato N-Scale GG1, EMD SD70ACe, EMD SD70M, EMD SD40-2 Mid Production. 4 Function with Auto Adjusting Back EMF and built-in onboard resistors for LED's and 1.5v . 2 Onboard superbright, golden white LED's. 1 Amp continuous motor drive, 2 Amp peak

Dimensions: 2.7”x.4”x or 68.85 mm by 10.16mm

SKU: 1318 K1D4-NC

Drop in decoder for Kato N scale EMD SD90/43MAC ,SD 80MAC, RS2 and RCS2. Will also fit Walthers LL Proto N RS2 with minor modifiction. 4 Function with Auto Adjusting Back EMF and built-in onboard resistors for LED's and 1.5v . 2 Onboard superbright, golden white LED's. 1 Amp continuous motor drive, 2 Amp peak.

Dimensions: 2.7”x.4”x or 68.85 mm by 10.16mm

SKU: 1294 K2D4

Drop in decoder for N-Scale Kato NW2 . 3 Function with Auto Adjusting Back EMF and built-in onboard resistor for an LED . 2 Onboard superbright, surface mount, Sunny White LED's. 1 Amp motor drive 2 Amp peak

Dimensions: 2.860”x0.680”x0.145” or 72.64mm x 17.272mm x 3.683 mm

SKU: 1295 K3D3

Drop-in decoder for Kato N Scale engines: ALCO PA1, E9A, E8/9A, P42 Genesis. 8 Function with Auto Adjusting Back EMF and built-in onboard resistor for an LED . 2 Onboard superbright, Golden White LED's, with long leads. 1 Amp motor drive 2 Amp peak. Note: Four of the functions (F1-F4) have onboard resistors for LEDS and 1.5v bulbs. The remaining two hardwire functions (F5-F6) output at 12v and will need external resistors if you plan to use LED's or 1.5v bulbs.

This decoder features onboard 680 ohm 1/4 watt resistors for LED's!

Dimensions: 2.53”x0.542”x0.155” or 64.26mm x 13.766mm x 3.937mm

SKU:  1332 -KOD8-A

Drop-in decoder for Kato N Scale engines: F3A, F7A. 8 Function with Auto Adjusting Back EMF and built-in onboard resistor for an LED . 1 Onboard superbright, Golden White LED's, with medium length leads. 1 Amp motor drive 2 Amp peak. Note: Four of the functions (F1-F4) have onboard resistors for LEDS and 1.5v bulbs. The remaining two hardwire functions (F5-F6) output at 12v and will need external resistors if you plan to use LED's or 1.5v bulbs.

This decoder features onboard 680 ohm 1/4 watt resistors for LED's!

Dimensions: 2.53”x0.542”x0.155” or 64.26mm x 13.766mm x 3.937mm

SKU: 1333 KOD8-B

Drop-in decoder for Kato N Scale engine: F40PH. 8 Function with Auto Adjusting Back EMF and built-in onboard resistor for an LED . 2 Onboard superbright, Golden White LED's, with short leads. 1 Amp motor drive 2 Amp peak. Note: Four of the functions (F1-F4) have onboard resistors for LEDS and 1.5v bulbs. The remaining two hardwire functions (F5-F6) output at 12v and will need external resistors if you plan to use LED's or 1.5v bulbs.

This decoder features onboard 680 ohm 1/4 watt resistors for LED's!

Dimensions: 2.53”x0.542”x0.155” or 64.26mm x 13.766mm x 3.937mm

SKU: 1338 KOD8- -C

Drop-in decoder for Kato N Scale engines: E9B, F3B, F7A, F7B, PB1. 8 Function with Auto Adjusting Back EMF and built-in onboard resistor for an LED . This decoder has no onboard LEDs because it is designed for locomotives without lights (B Units). 1 Amp motor drive 2 Amp peak. Note: Four of the functions (F1-F4) have onboard resistors for LEDS and 1.5v bulbs. The remaining two hardwire functions (F5-F6) output at 12v and will need external resistors if you plan to use LED's or 1.5v bulbs.

This decoder features onboard 680 ohm 1/4 watt resistors for LED's!

Dimensions: 2.53”x0.542”x0.155” or 64.26mm x 13.766mm x 3.937mm

SKU: 1339 KOD8-D

The IMD 4 is a drop-in for the Intermountain`SD40T-2,SD45T-2, SD45-2. It has two LED's (one on the front, and one on the back), and it supports to extra functions by way of soldered on leads.

The IMD4 features the TCS exclusive auto-adjusting BEMF.

The IMF4 is a drop-in for the Intermountain F3A, F3B, F7A, F7B, and F9B units. This decoder has pads to solder the leads from the facotry installed lights and it supports to extra functions by way of soldered on leads.

The IMF4 features the TCS exclusive auto-adjusting BEMF.

Dimensions: 0.47" X 0.179" X 2.158" or 11.93mm. X 4.54mm. X 54.81mm.

SKU: 1328 IMF4

The IMFP4 is a drop-in for the Intermountain FP7A, and FP9A units. This decoder has pads to solder the leads from the facotry installed lights and it supports to extra functions by way of soldered on leads.

The IMFP4 features the TCS exclusive auto-adjusting BEMF.

Dimensions: 0.47" X 0.179" X 2.158" or 11.93mm. X 4.54mm. X 54.81mm.

SKU: 1329-IMFP4

The IMFTA4 is a drop-in for the Intermountain FTA unit. This decoder has pads to solder the leads from the facotry installed lights and it supports to extra functions by way of soldered on leads.

The IMFTA4 features the TCS exclusive auto-adjusting BEMF.

Dimensions: 0.47" X 0.179" X 2.158" or 11.93mm. X 4.54mm. X 54.81mm.

SKU: 1330-IMFTA4

The IMFTB4 is a drop-in for the Intermountain FTB unit. This decoder has pads to solder the leads from the facotry installed lights and it supports to extra functions by way of soldered on leads.

The IMFTB4 features the TCS exclusive auto-adjusting BEMF.

Dimensions: 0.47" X 0.179" X 2.158" or 11.93mm. X 4.54mm. X 54.81mm.

SKU: 1331-IMFTB4