NANCY'S TRAINS YOUR DCC DECODER SOURCE

   Photos on this page courtesy of Train Control Systems.

DP5

 This full featured BEMF decoder with 5 available functions is designed specifically to meet the needs of Atlas Silver Series HO-Scale modelers who are converting their HO-Scale locomotives to DCC.This decoder will also fit many other engines including KATO and Athearn. We have included our first generation BEMF for outstanding slow speed performance, quiet drive for super quiet engine performance, and auto adjusting motor control for hassle free set-up. Dimensions: .636"X .509"X 0.042" or 16.15mm X 12.92mm X 1.06mm. SKU: 1335

Now featuring Railcom detection for railroad automation.

DP2X-UK 1287

 An HO scale decoder with a built in 8 pin NMRA plug which is oriented vertically to fit in British outline locomotives. By far one of the easiest decoders to install, the DP2X-UK can be plugged into many British locomotives with no effort. Provides 1 amp continuous and 2 amp peak draw. The DP2X-UK features TCS exclusive auto-adjusting BEMF. Dimensions: .460”x.690”x.140” or 11.7mm x17.5 mm x 3.5mm SKU: 1287

DP2X 1028

 An HO scale decoder with a built in 8 pin NMRA plug. By far one of the easiest decoders to install, the DP2X can be plugged into many locomotives with no effort. Provides 1 amp continuous and 2 amp peak draw. The DP2X features TCS exclusive auto-adjusting BEMF. The DP2X is a motor control decoder with two lighting functions (headlight and reverse light) Dimensions: .460”x.690”x.140” or 11.7mm x17.5 mm x 3.5mm SKU: 1028

 A6X 1001

Six-function (headlight/reverse light and four extra functions), 1.3-amp continuous 2.0 amp peak, 1.3-amp HO "drop in" decoder with on board 1.5 volt regulated power supply for Atlas, Athearn, Kato, Bachmann, etc. The A6X features TCS exclusive, auto-adjusting BEMF, and an onboard 1.5v supply. NEW: This decoder also features onboard 1K ohm 1/4 watt resistors for LED's! Dimensions: 2.860”x0.680”x0.145” or 72.64mm x 17.272mm x 3.683mm SKU: 1001

An HO scale decoder a 9 pin socket. This decoder can be hardwired, plugged straight into some locomotives, or connected to the 8-pin NMRA sockets using a variety of the available harnesses. Provides 1.3 amp continuous and 2 amp peak draw. The T6X features TCS exclusive auto-adjusting BEMF.

The T6X is a motor control decoder with six lighting functions (headlight, reverse light, and 4 extra functions)

Dimensions .956”x.655”x.207” or 24.28mm x 16.63mm x 5.25mm

SKU: 1026

A shorter version of the AMD4, the ASD4 is a drop-in for the Atlas GP7, GP9, GP30, and GP35. It has two LED's (one on the front, and one on the back), and it supports to extra functions by way of soldered on leads.

The ASD4 features the TCS exclusive auto-adjusting BEMF.

This decoder features onboard 680 ohm 1/4 watt resistors for LED's!

Dimensions 2.73”x.349”x.13” or 69.34mm x 8.865mm x 3.3mm

SKU: 1279

The AMD4 is drop in for the Atlas: GP-38, RS-11, Dash8-40B, Dash8-40BW, C628, C630, B23-7, B30-7, B36-7, Also DCC ready version of GP-40, GP-40-2, SD-7, SD-9, SD-35, TrainMaster and U25B.

It has two extra functions which can be connected by soldering onto provided pads.

The AMD4 features the TCS exclusive auto-adjusting BEMF.

This decoder features onboard 680 ohm 1/4 watt resistors for LED's!

Dimensions 2.83”x.351”x.13” or 71.88mm x 8.92mm x 3.3mm

SKU: 1029

The CN-GP follows in the same style as the Classic N decoder. This decoder features a split decoder, designed to fit in split lighting board GP Locomotives. As with the CN a small amount of soldering is required, but it is still far easier than milling the frame and adding LED's. The CN-GP comes with onboard sunny white, super-bright, forward and reverse LEDs.

The CN-GP features the TCS exclusive auto-adjusting BEMF for incredible slow speed control.

A shorter version of the AMD4, the ASD4 is a drop-in for the Atlas GP7, GP9, GP30, and GP35. It has two LED's (one on the front, and one on the back), and it supports to extra functions by way of soldered on leads.

The ASD4 features the TCS exclusive auto-adjusting BEMF.

SKU: 1279

This decoder features onboard 680 ohm 1/4 watt resistors for LED's!

Dimensions 2.73”x.349”x.13” or 69.34mm x 8.865mm x 3.3mm

HO TCS DECODERS