Zephyr Starter Set includes DCS50 Command station booster/throttle, PS315 power supply, LT1 LocoNet Cable/Decoder Tester, and complete manuals! The Zephyr Starter Set is the most comprehensive entry level DCC system on the market! Most of the advanced features found only on professional level systems are included in this system. The Zephyr can be incorporated into your expanded layout if you move up to the Empire Builder or even the Chief
$199.99 $170.00
Zephyr’s a WINNER!
Everything you need to get started in Digitrax Command Control for a great low price.
Zephyr is perfect for beginning, intermediate and advanced model railroaders. It is easy to use and has tons of features.
Zephyr offers excellent speed control, prototypical consisting, the full range of programming features and much more.
Zephyr is a breath of fresh air in model railroading.
DCS50 Throttle/Command Station/Booster All-In-One $179.99 msrpZephyr’s DCS50 is approximately 7.25" wide, 5.5" deep (including rear connector), 2.75" high (including knobs).
All hook up is in the rear of the unit so, leave plenty of room for wires.
Note: Digitrax Zephyr Starter Sets does not include mobile decoders. There are a wide variety of DCC decoders available today and some are made to fit specific locomotives. Some decoders have more features and cost more money and some are less expensive with fewer features. Your Digitrax authorized dealer will be able to assist you in choosing the “right” decoder for your layout. Click here to visit our decoder selection pages.
Note: The PS315 Power Supply is made for the US and Canadian markets. The DCS50 can be used with any power supply that delivers 15V AC, 3Amps. If you are using DCS50 outside US and Canada, please order DCS50 alone and purchase the power supply locally.
MSRP $349.99 LESS 15%= $297.00
Item #
Description
Picture
Price
Purchase
SEB
Super Empire Builder Starter Set comes with DB150 Command Station/Booster (5 amps) with AutoReverse, DT400 Super Throttle (Infra ready), one UP5 Digitrax Universal Panel, one LT1 LocoNet Cable/ Decoder Test Kit, Super Empire Builder Manual, and Digitrax Decoder Manual
$349.00 $297.00
Everything you need to get started in Advanced Digitrax Command Control for a reasonable price.
Super Empire Builder is perfect for most home and club layouts.
It offers excellent speed control, prototypical consisting, the full range of programming features and much more.
Build your railroad empire with Super Empire Builder.
Super Empire Builder Set Includes:
DB150 Command Station/Booster With Intelligent AutoReverse
DT400 Super Throttle & DB150 Command Station Offers
User interface makes DCC simple.
Dual throttle controls.
Full numeric key pad.
Simplified 4 digit addressing.
Easy address browsing and selection.
User friendly text messages to guide you.
Click encoders for smooth speed control.
Multi-line LCD display puts all the information you need right at your fingertips.
Infra-ready out of the box. Radio equipped version also available.
Ready for transponding and cab signaling.
Plenty of Capacity for Most Layouts
Run up to 22 addresses at the same time on your system.
Run up to 22 throttles at the same time on your system.
Over 9000 Locomotive Addresses
Address 00 for operation of one or more locos without decoders
Two Digit Addressing is easy to use. (Address 01-127)
Four Digit Addressing-use the road number of your engines as their addresses. (Address 0128-9000+).
5 Amps of Power to run more trains.
Selectable scale voltage for safe operation in ALL scales.
Function Control
Control 13 functions-F0 through F12.
Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder).
Decoder Programming
Built in programmer that can write all CVs.
Supports Paged programming (Digitrax preferred method). Also supports direct & register mode programming.
Operations mode programming can be used to program decoders on the layout.
Stationary Decoders, Turnout Control & Turnout Position Reporting
Access to stationary decoder control for turnouts and other devices.
DT400 reports turnout position based on last command sent.
Control 999 stationary decoder addresses.
Consisting
Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos.
Advanced consisting, allows only advanced consist capable mobile decoders.
Basic consisting, program decoders to run on same address.
UP5 Universal Panel
Makes LocoNet hook up simple!
2 LocoNet jacks for hooking up your LocoNet network.
3 throttle jacks for hooking up throttles and other non-RailSync devices.
Included with non-radio sets. Radio equipped sets include UR91 radio receiver.
Expandability with Digitrax LocoNet
Use Super Empire Builder as a starting point, then add components.
Use Super Empire Builder as an expansion set with Digitrax equipment you already have installed.
Super Empire Builder is more than just a starter set!
Because all Digitrax Sets are value priced, they are great as expansion sets for existing systems.
So, if you need another booster and throttle, it is a much better deal to buy a set!
Item #
Description
Picture
Price
Purchase
SCF200
The Radio Equipped 8 amp Super Chief Starter Set is for the large Scale professional model railroader who needs extra power to operate larger locos and multiple trains without plugging in a throttle to run trains. Radio Equipped 8 amp Super Chief is for G, O, and S Scale layouts with multiple operators and trains for tether less operation
$659.00 $560.00
Super Chief has it all!
The Super Chief Starter Set is designed for the model railroader who wants all the latest features available in command control today.
Super Chief can run up to 120 locos & throttles at the same time
Note: Digitrax Starter Sets do not include mobile decoders or power supplies. There are a wide variety of DCC decoders available today and some are made to fit specific locomotives. Some decoders have more features and cost more money and some are less expensive with fewer features. Your Digitrax authorized dealer will be able to assist you in choosing the “right” decoder for your layout. Click here to visit our mobile and stationary decoder selection pages. There are many different power supplies that you can use to power your Digitrax system and you may already own an appropriate power supply so rather than force you to purchase a power supply you may not need, we leave that decision up to you and your dealer. Click here to learn about Digitrax power supplies that are available.
DT400 Super Throttle and DCS100 Command Station Offers:
User interface makes DCC simple.
Dual throttle controls.
Full numeric key pad.
Simplified 4 digit addressing.
Easy address browsing and selection.
User friendly text messages to guide you.
Click encoders for smooth speed control.
Multi-line LCD display puts all information at your fingertips.
Infra-ready out of the box. Radio version available.
Ready for transponding and cab signaling.
Big System Capacity for Big Layouts
Run up to 120 addresses at the same time on your system.
Run up to 120 throttles at the same time on your system.
Over 9000 Locomotive Addresses
Address 00 for operation of one or more locos without decoders
Two Digit Addressing is easy to use. (Address 01-127)
Four Digit Addressing lets you use the road number of your engines as their addresses. (Address 0128-9000+)
5 Amps of Power to Run More Trains
Selectable Scale Voltage for Safe Operation in ALL Scales
8 Amp Version Also Available
Function Control
Control 14 functions-F0 through F12.
Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder capabilities).
Two DCC Outputs are Better than One!
Use one output for programming decoders while the other runs the layout. No need to shut down the layout to program decoders!
Use one output for a braking section while the other runs the layout.
Decoder Programming
Built in read/write programmer lets you program and read back CV values.
Supports Paged programming (Digitrax preferred method). Also supports direct and register mode programming.
Consisting
Universal consisting, Digitrax preferred method. Allows ALL locos to be consisted prototypically, even analog locos.
Advanced consisting and Basic consisting, too!
Nested consisting where consists can be consisted together.
Stationary Decoders, Turnout Control & Turnout Position Reporting
Access to stationary decoder control for turnouts and other devices.
DT400 reports turnout position based on last command sent.
Control 999 stationary decoder addresses.
Routes
Turnout List/Route capability to simplify complex yard operations.
Customizable System Options
User adjustable voltage trim.
Turn audible warnings on or off.
Set up purging options.
Multi-format command station mode (Motorola Trinary Format).
DCS100 is the most flexible command station on the market.
Expandability
Super Chief is just the beginning for large, complex layouts that emphasize prototypical operations.
With LocoNet you can add more boosters, throttles, power management, detection, transponding, signaling and much more.
To expand Super Empire Builder for all the capabilities of the Super Chief, simply add a DCS100.
If you want to add another throttle at the same time, then it makes sense to add an entire Super Chief set and take advantage of the value pricing offered on Digitrax sets.
MSRP $449.99 LESS 15% = $382.65
Item #
Description
Picture
Price
Purchase
SCF
Super Chief Starter Set includes a DCS100 Command Station/Booster (5 amps), DT400 Super Throttle, UP5 LocoNet Universal Panel, one LT1 LocoNet Cable/Decoder test Kit, Super Chief Manual, and Digitrax Decoder Manual.
For large N and HO scale layouts
$449.00 $382.65
5 AMP RADIO STARTER SET
MFSR $639.99 15% OFF = $535.01
Item #
Description
Picture
Price
Purchase
SEBRE
Radio Equipped Super Empire Builder Starter Set includes a DB150 command Station/ Booster, a DT400R Super Throttle Radio, a UR91 Radio Receiver, an LT1 Cable/Decoder Tester, a 12 volt UR91 power supply, and complete manuals. 5 AMP Radio Empire Builder for N and HO layouts
