DCS50 Throttle/Command Station/Booster All-In-One $179.99 msrpZephyr’s DCS50 is approximately 7.25" wide, 5.5" deep (including rear connector), 2.75" high (including knobs).
All hook up is in the rear of the unit so, leave plenty of room for wires.
Note: Digitrax Zephyr Starter Sets does not include mobile decoders. There are a wide variety of DCC decoders available today and some are made to fit specific locomotives. Some decoders have more features and cost more money and some are less expensive with fewer features. Your Digitrax authorized dealer will be able to assist you in choosing the “right” decoder for your layout. Click here to visit our decoder selection pages.
Note: The PS315 Power Supply is made for the US and Canadian markets. The DCS50 can be used with any power supply that delivers 15V AC, 3Amps. If you are using DCS50 outside US and Canada, please order DCS50 alone and purchase the power supply locally.
Everything you need to get started in Advanced Digitrax Command Control for a reasonable price.
Super Empire Builder is perfect for most home and club layouts.
It offers excellent speed control, prototypical consisting, the full range of programming features and much more.
Build your railroad empire with Super Empire Builder.
Super Empire Builder Set Includes:
DB150 Command Station/Booster With Intelligent AutoReverse
Note: Digitrax Starter Sets do not include mobile decoders or power supplies. There are a wide variety of DCC decoders available today and some are made to fit specific locomotives. Some decoders have more features and cost more money and some are less expensive with fewer features. Your Digitrax authorized dealer will be able to assist you in choosing the “right” decoder for your layout. Click here to visit our mobile and stationary decoder selection pages. There are many different power supplies that you can use to power your Digitrax system and you may already own an appropriate power supply so rather than force you to purchase a power supply you may not need, we leave that decision up to you and your dealer. Click here to learn about Digitrax power supplies that are available.
DT400 Super Throttle and DCS100 Command Station Offers:
User interface makes DCC simple.
Dual throttle controls.
Full numeric key pad.
Simplified 4 digit addressing.
Easy address browsing and selection.
User friendly text messages to guide you.
Click encoders for smooth speed control.
Multi-line LCD display puts all information at your fingertips.
Infra-ready out of the box. Radio version available.
Ready for transponding and cab signaling.
Big System Capacity for Big Layouts
Run up to 120 addresses at the same time on your system.
Run up to 120 throttles at the same time on your system.
Over 9000 Locomotive Addresses
Address 00 for operation of one or more locos without decoders
Two Digit Addressing is easy to use. (Address 01-127)
Four Digit Addressing lets you use the road number of your engines as their addresses. (Address 0128-9000+)
5 Amps of Power to Run More Trains
Selectable Scale Voltage for Safe Operation in ALL Scales
8 Amp Version Also Available
Function Control
Control 14 functions-F0 through F12.
Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder capabilities).
Two DCC Outputs are Better than One!
Use one output for programming decoders while the other runs the layout. No need to shut down the layout to program decoders!
Use one output for a braking section while the other runs the layout.
Decoder Programming
Built in read/write programmer lets you program and read back CV values.
Supports Paged programming (Digitrax preferred method). Also supports direct and register mode programming.
Consisting
Universal consisting, Digitrax preferred method. Allows ALL locos to be consisted prototypically, even analog locos.
Advanced consisting and Basic consisting, too!
Nested consisting where consists can be consisted together.
Stationary Decoders, Turnout Control & Turnout Position Reporting
Access to stationary decoder control for turnouts and other devices.
DT400 reports turnout position based on last command sent.
Control 999 stationary decoder addresses.
Routes
Turnout List/Route capability to simplify complex yard operations.
Customizable System Options
User adjustable voltage trim.
Turn audible warnings on or off.
Set up purging options.
Multi-format command station mode (Motorola Trinary Format).
DCS100 is the most flexible command station on the market.
Expandability
Super Chief is just the beginning for large, complex layouts that emphasize prototypical operations.
With LocoNet you can add more boosters, throttles, power management, detection, transponding, signaling and much more.
To expand Super Empire Builder for all the capabilities of the Super Chief, simply add a DCS100.
If you want to add another throttle at the same time, then it makes sense to add an entire Super Chief set and take advantage of the value pricing offered on Digitrax sets.
2001 - 2012 Nancy’s Trains and Things. All rights reserved. No portion of this website may be copied without prior written permission by Nancy’s Trains and Things. All prices listed on this site are subject to change without prior notice.
YOU pay for customs
Buyers pay additional costs such as duties, taxes, and customs clearance fees. International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying. Note: It's illegal to falsify customs declarations or mark an item as a "gift" in order to avoid customs fees. Do NOT ASKS ME to commit customs fraud,
