Nancy's Trains and Things
PayPal Logo
   

ESU-LOKSOUND SPEAKERS

?

ESU-LOKSOUND SPEAKERS

50321 Speaker 11mm x 15mm square, 8 Ohms, 0.5W, with sound chamber set $10.49

50323 SSpeaker 40mm round, 8 Ohms, with sound chamber for LokSound H0, LokSound XL $16.49

50325 Speaker 16mm x 35mm square, 8 Ohms, 1~2W, with sound chamber $8.00

?

50326 Loudspeaker 14mm x 12mm, square, 4 Ohms, with integrated sound chamber, selfadhesive,

$10.49

50327 Two loudspeakers 16mm, oval, 8 Ohms, 1~2W, with common sound chamber $8.00

50328 Two loudspeakers 13 mm, 8 Ohms, round, 1~2W, with sound chamber $8.00

50330 Loudspeaker 16mm x 25mm, square, 4 Ohms, with sound chamber $8.00

50331 Loudspeaker 20mm, round, 4 Ohms, 1~2W, with sound chamber $8.00

50332 Loudspeaker 23mm, round, 4 Ohms, 1~2W, with sound chamber $ $8.00

50333 Loudspeaker 28mm, round, 4 Ohms, 1~2 W, with sound chamber $8.00

50334 Loudspeaker 20mm x 40mm, square, 4 Ohms, 1~2 W, with sound chamber 0 $8.00

When selecting the SPEAKER  loudspeaker the used decoder type is important. Depending on DCC the decoder, different loudspeakers can be used as follows:

DCC LokSound V4.0, LokSound micro V4.0 and LokSound V4.0 M4 decoders need the new speaker with an impendance of 4 Ohms. With the present 100 Ohms loudspeakers you would hardly hear anything.

When selecting the loudspeaker the used decoder type is important. Depending on the decoder, different loudspeakers can be used as follows:

LokSound V4.0, LokSound micro V4.0 and LokSound V4.0 M4 decoders need the new speaker with an impendance of 4 Ohms. With the present 100 Ohms loudspeakers you would hardly hear anything.

Conversely, you must never use the new 4 Ohms speakers with the previous LokSound V3.5 decoder. The decoder could be destroyed! When the decoder is replaced, the speaker must! be changed as well.


MSRP $36.99

NANCYS PRICR $31.44

54611 LokPilot V4.0, DCC, 8-pin plug NEM652, cable harness


Loudspeakers for great sound

A very important part of the LokSound system is the speaker. Therefore, we only use specially developed loudspeakers geared to the sound decoder. Here we recommend the following old saying, the bigger the speaker, the better the sound. As such, we offer loudspeakers in various sizes, one of them will surely fit into your loco. Should there not be enough space, you can also install the speaker in a ‘ghost waggon’ directly behind the loco.

Another crucial accessory is the sound chamber. This helps create the necessary sound pressure for the speaker´s membrane and comes with most loudspeakers.

If you are not sure about which loudspeaker fits into your loco we generally recommend to open the loco and measure the dimensions with a ruler.

Since model railway manufacturers often tend to change (tacitly) the inner modifications of their locos we are not able to make recommendations in general. Therefore rely on your own observations!


$13.50

50707 Interior lighting, current collector for waggons N/ H0, 8-piece set (sufficient for 8 axes), gauge: N, TT, H0

$13.50

50707 Interior lighting, current collector for waggons N/ H0, 8-piece set (sufficient for 8 axes), gauge: N, TT, H0

50321 Loudspeaker 15mm x 11mm, 8 Ohms, with 4pc sound chamber kit


50321 Loudspeaker 15mm x 11mm, 8 Ohms, with 4pc sound chamber kit



50326 Loudspeaker 14mm x 12mm, 8 Ohms,


ESU 50706 POWER PACK ENEG

 $9.99